Neptune Hydroponics air pumps help our irrigation tanks stay oxygenated thanks to the fine air bubbles that simulate the natural process of seas and rivers.
Specification:
Name | NHA2 | |
---|---|---|
Voltage | 110V/60Hz | |
Power | 4.0W | |
Pressure | 0.015 MPa | |
Output | 0.8 GPH/min | |
Number of outputs | 2 | |
Dimensions | 133x70x60mm |
INSTALLATION
1. Connect your air pipe(4mm internal diameter) to the air pump's outlet, position your air pipe in your tank with a ir stone, then start work.
2. Place the air pump above water level on a flat surface, otherwise please connect a non return valve between air hose a few inches from the air pump, to ensure water is not siphoned back into the air pump.
3. Using the dial on the back of the air pump to adjust the output.
Write your opinion