PLANT! T Water Timer
can be used in connection with a tap supply or with a gravity system from a tank (operating pressure from 0 to 7.5 atmospheres). The timer has two regulators, one for watering duration and the other for watering frequency. Just set the timer and the rest will take care of the clocks. How to do it ? It's easy, turn the RUN TIME dial to the desired watering duration, and then set the second FRAQUENCY dial, which is the watering frequency.
PLANT! T Water Timer is ideal for all types of irrigation, hydroponic systems, when watering gardens, lawns, etc. It is resistant to weather conditions, automatically turns off when the battery level is low.
Has a safety valve automatically turns off when the battery level is low.
The controller also has a program delay button we use it when maintenance and other work is needed. The kit includes all necessary valves and a pre-filter.
Water Timer is highly resistant to weather conditions, dial with knobs completely covered. Powered by two 1.5V AAA alkaline batteries (not included), low energy demand (all season, minimal working time without changing batteries).
Technical data:
Intended for outdoor use only with cold water.
Water working pressure: 0 - 110 PSI / 0 - 7.5 bar
Operating temperature: Protect against freezing - maximum temperature: 43 ° C
Connection: ¾ male / female tap / hose connector (includes required connectors)
Inlet with F 3/4 "internal thread
Outlet with M 3/4 "external thread
Dimensions: 11 x 10 x 16.5 cm
It has an operating pressure range of 0- 110 PSI (0-7.5 bar) and includes the required fitting fittings.
Watering frequency can be selected: 1, 2, 3, 4, 6, 8, 12, 24, 48, 72 hours, 1 week and during watering 1, 3, 5, 10, 15, 20, 30, 60, 90 or 120 minutes.