• GALAXYFARM HTC-1 Digital Temperature & Humidity Meter
  • GALAXYFARM HTC-1 Digital Temperature & Humidity Meter
  • GALAXYFARM HTC-1 Digital Temperature & Humidity Meter
  • GALAXYFARM HTC-1 Digital Temperature & Humidity Meter
  • GALAXYFARM HTC-1 Digital Temperature & Humidity Meter
  • GALAXYFARM HTC-1 Digital Temperature & Humidity Meter

GALAXYFARM HTC-1 Digital Temperature & Humidity Meter

  • NEW Station for moisture, temperature and time measurement
Producer: GALAXYFARM®
Product code: HTC-1
6,90 €
/ piece
5,61 €
/ piece

GALAXYFARM HTC-1 Digital Temperature & Humidity Meter

 

Specification

MODEL: GALAXYFARM HTC-1

ELECTRONIC WEATHER STATION



Power - battery : classic 1 x AAA (not included)
Temperature Range:: -50~70 Degrees Celsius
Humidity range: 10% -99%
Temperature measurement accuracy /- 1 degree
Humidity measurement accuracy -5% RH(40%-80%)
Memory max.


Basic functions:

• Temperature ℃ / Humidity %

• MAX/MIN temp/humidity memory function

• 12/24 hour clock

• The whole point time keeping function

• Calendar



Operation manual:

1. Insert the battery (1x AAA)

2. Time setting: In the initial state, press MODE until you hear the „BEEP” sound (around 3 seconds) and the minutes setting start
flashing; press ADJ to adjust the number, press MODE to set minutes number, then the number of hours start flashing. Repeat
above steps to set an hour number, and enter hours settings. Press ADJ to choose a 12 or 24 hour system, press MODE to set. By
clicking further MODE it is possible to set year, month (M) and day (D).

3. Alarm setting: In the initial state press MODE once (semicolon between hour and minutes stops flashing)

If you want to set classic alarm that will go on at specific time, click repeatedly the “ADJ” button until you see a sign with “ALARM”

literal, next press and hold MODE until you hear the „BEEP” sound and the number of minutes start flashing, from now on follow the
same logic as in step 2 during time setting. When you finish setting the alarm press MODE once to exit the alarm time setting.

If you want to set hourly alarm, press ADJ until you see this icon:

If you choose this option the device will make the “BEEP” sound after every full hour.

You can also choose both options at the same time by choosing the last option with a sign “ALARM” .

* When the alarm is on, the sound will go on for a one minute, press any button to stop the alarm;

4. Press MEMORY button to display the MAX/MIN/Current temperature/humidity

5. Memory clear function: in MAX or MIN state, press and hold MEMORY until you hear the „BEEP” sound to clear MAX/MIN data

6. Switching to °C/°F : to change the unit simply press the black button located on the back side of the device (under the supporting leg)





Ask for this product

If this description is not sufficient, please send us a question to this product. We will reply as soon as possible.

Data is processed in accordance with the privacy policy. By submitting data, you accept privacy policy provisions.

Fields marked with an asterisk are required
Write your opinion
Your opinion:
5/5
Add your own product photo:
This page uses cookie files to provide its services in accordance to Cookies Usage Policy. You can determine conditions of storing or access to cookie files in your web browser.
Close
pixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixelpixel