Bluelab Guardian Monitor Connect In-Line pH, EC and temperature monitor

Only one Bluelab Connect Stick (purchased separately) is required to receive wireless data from one or more Guardian Monitor monitors (not included)
For remote or cloud access, the computer you are already signing in to will need permanent Internet access.

An easy-to-use monitor that measures pH, EC and temperature directly in the irrigation line, can be wall mounted or hung from a support bar. Set up the reservoir, put the pH and EC electrodes in the solution, then turn on the device! Just set high and low alarm states - if the solution deviates from the ideal range, the display flashes. A quick glance at the monitor will let you know when the solution needs to be adjusted. Purpose: aquariums, plant cultivation, greenhouses, hydroponics, industry. The user manual for the monitor and instructions for wireless connection can be found under the videos in the DOWNLOAD tab!

• Simple 1-button calibration for pH 7 and pH 4
• High pressure pH probe - easy to clean and calibrate
• Data logs direct to PC via wireless connection with Bluelab Connect Stick
• Personalized alarm settings
• 24/7 monitoring, which will be sent by mail email if something goes wrong
• 3/4 'NPT high pressure pH probe
• Adapter flange to increase the pH probe thread to 1 'NPT
• Conductivity probe with thread 1 'NPT

REMEMBER !!!
- the meter electrode must always be wet, it is used for this only KCL fluid.
- do not store the electrode in reverse osmosis, distilled or de-ionized water - void of warranty, the electrode will change color .
- the substrate must be damp.
- we recommend calibrating at least every 30 days. The meter has the function of reminding the expiry of 30 days.
- calibration is performed in the sequence PH7 and then PH4.

pH EC Temperature

Operating range 0.0-14.0 pH 0 - 5.0 EC 0 - 50 ° C

Accuracy 0.1 pH 0.1 EC 1 ° C

Accuracy at 25 ° C ± 0.1 pH ± 0.1 EC ± 1 ° C

Calibration Two point (pH 7.0 and pH 4.0 or pH 10.0) Not required (Factory calibrated) Not required (Factory calibrated)

Automatic temperature compensation YES

Operating environment: 0-50 ° C

Power source: Input: 100-240 VAC, 50-60 Hz, 5 VA

Signal strength: Inside: 20 meters. Outside: 50 meters

Frequency response: 2.4 GHz ISM

System Requirements: Microsoft Windows XP or higher for Bluelab Connect Software, Internet connection for remote access and cloud assisted metering